80L Workshop Garage Portable Waste Oil Drainer tank Extractor mobile Collection
80L Workshop Garage Portable Waste Oil Drainer tank Extractor mobile Collection. This Waste Oil Drain Tank Is Very Convenient! You Can Quickly Understand the Air Pressure in the Tank with an Accurate Pressure Gauge.
Use an Air Compressor to Help You Complete the Waste Oil Recovery Work More Efficiently! It Is a Good Helper for Your Car Oil Change! It Is Suitable for the Factory, Auto Repair Shop, and Home Use. Applicable Medium: Engine Oil, Gear Oil. Measuring Cup Capacity: 10l/2.2gal.
Measuring Cup Size: 2526cm/9.8410.23inch. Oil Machine Size: 4040157cm/15.7415.7461.81inch. Length of Tubing: 63cm/24.8inch.
Length of Oil Sucker Needle: 83cm/32.67inch. Package Size: 504290cm/19.716.535.4inch. 3 X Oil Sucker Needles.
Increased Efficiency: This Waste Oil Drain Tank Allows You to Easily Transfer Used Oil from the Built-in Fuel Tank to Your Own Auxiliary Container, Helping You Increase Your Work Efficiency and save Labor. Integrated Pumping and Containing: This Waste Oil Drain Tank Is Equipped with a 10l/2.2gal Measuring Cup, Which Can Be Used to Hold the Pumped Waste Oil. It Realizes the Integration of Pumping and Containing, and You Don't Need to Equip a Separate Container for Oil.
Strong Negative Pressure Capability: This Waste Oil Drain Tank Adopts a Vacuum Pump, Which Has Strong Negative Pressure Capability, Stronger Suction, and Faster Oil Pumping. Good Sealing: This Waste Oil Drain Tank Adopts Industrial-grade Sealing Technology. It Will Not Easily Leak Oil or Air to Affect the Performance of the Device. Low Working Noise: It Is Equipped with a Muffler on the Measuring Cup, Which Can Reduce the Noise When the Tank Is Working and Provide You with a Quiet Working Environment.Large Capacity: the Oil Drain Tank Has a Capacity of 17.6 Gallons, Which Can Collect Waste Oil from 8-10 Cars at a Time Without Frequent Cleaning of the Oil Tank. Easy to Move: This Waste Oil Drain Tank Is Equipped with Four Wheels at the Bottom, Two Are Swivel Wheels at the Front and Two Are Directional Wheels at the Back.
So You Can Easily Move or Fix It. And the Measuring Cups Are Wrapped in Layers of Foam and Bubble Wrap, so You Can Rest Assured That You Are Waiting for the Product That Belongs to You! Comfortable Handle: the Handle Design Is Ergonomic and Widened to 9in, so the Grip Is Very Comfortable.Pressure Gauge: the Pressure Gauge Is Very Accurate and Gives You a Quick Idea of the Air Pressure in the Tank. Large Diameter Funnel: the Oil Drain Pan Is Designed with a Funnel Shape, Whose Diameter Is 15.
The Big Pan Is Perfect for Transferring Oil and Effectively Prevents Waste Oil from Spilling. Filter Port: the Funnel Is Designed with a Mesh Filter Port, Which Can Filter out the Solid Impurities in the Waste Oil and Place the Oil Pipe to Be Blocked.Glass Measuring Cup: the Measuring Cup Is Made of Glass, Which Is Resistant to High Temperatures. Its Capacity Is 2.2gal, and It Can Recover a Lot of Oil at One Time, Which Can Improve Work Efficiency. It Is Prohibited to Use This Machine to Extract Corrosive Liquids Such As Transmission Oil, Brake Oil, or Oils Containing Additives.
It Is Prohibited That the Oil Level to Be Too High, Otherwise, the Residual Oil Will Overflow from the Bottom of the Measuring Cup. When Pumping Vacuum, Please Use Clean Air (That Has Filtered Oil, Impurities, and Moisture), and the Pressure Should Not Be Lower than 8kg/Cm². During Oil Extraction, the Temperature Should Not Exceed 60°C, and It Is Recommended to Be Between 40°C and 60°C. Be Sure to Close the Valve Between the Tank and the Measuring Cup Connection When the Tank Is Draining.The Compressed Air in the Tank Cannot Enter the Measuring Cup, Otherwise, It Will Cause the Measuring Cup to Rupture. The Oil Discharge Pressure of the Tank Should Be 0.7kg/Cm² When the Oil Is Discharged.
The Maximum Pressure During Oil Discharge Is Absolutely Not Allowed to Be 1kg/Cm². When the Oil Is Exhausted, Please Empty the Remaining Compressed Air in the Tank Before It Can Work Again. When Adding Air and Oil or When There Is Air Pressure in the Tank, the Ball Valve Under the Measuring Cup Must Be Closed Tightly. (Horizontal Is off, Vertical Is on). Its Maximum Working Pressure Is 0.8kg/Cm². If the Air Pressure Provided by Your Air Compressor Exceeds 0.8kg/Cm², Please Be Sure to Install a Regulating Valve to Reduce the Air Pressure to 0.8kg/Cm² or less. Please Do Not Use Strong Acid or Strong Alkali Solution, or some Toxic Liquids. The Equipment Should Be Kept Away from Fire or Heat Sources so Do Not Smoke near the Equipment. The Air Compressor Valve Should Be Closed Before Maintenance. The Temperature of the Waste Oil of This Pumping Unit Is Suitable for 60-100? If the Oil Pumping Speed Is Normal in This Temperature Range. If It Is Lower than This Temperature, It May Not Be Able to Pump or the Pumping Speed Will Be Slow.The Initial Pressure of the Air Compressor Matched with the Equipment Can Reach 10bar. When the Conveying Pipeline Reaches the Air Inlet of the Equipment, the Air Pressure Is Not Lower than 8 bar. When the Air Pressure Is Lower than the Air Pressure, the Vacuum Degree Will Be Low, Which Will Cause the Phenomenon That the Pump Cannot Be Pumped or the Pumping Speed Is Slow. When Meeting the Above Two Points, Pay Attention to Using the Most Suitable Oil Suction Pipe. The Steel Pipe Has the Characteristics of Good Circulation, While the Plastic Pipe Has Good Bendability, the Large Pipe Is 1.6l per Minute, and the Small Pipe Is 0.6l per Minute.
Please Lengthen About 2-3cm According to the Ratio of the Oil Dipstick to the Oil Level, so That the Oil Can Be Absorbed. Please Do Not Suck to the End, Otherwise, It Will Bend Upward, and If It Exceeds the Oil Level, There Will Be No Oil Extraction. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received.
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Stable characteristics, high reliability, Long service life, Easy installation, Convenient Use, Easy Operation. 38 cm (14.96 inch). 163 cm (64.17 inch). 105 cm (41.34 inch).